customizable price
Choose you options options below
- Adjustable digital SMC vacuum cutout switch.
- 8mm one-touch input fitting.
- Fused 240vac 5A output.
In stock (can be backordered)
- 3.5L capacity.
- 4x 8-12mm suction ports in lid.
- 3x 3/8 BSPT hoses in manifold block.
- 155mm ID x 185mm high.
- 4L per sec.
- Filtered exhaust
- supplied with a check-valved 6mm hosetail barb fitted.
- 1L per sec.
- Filtered exhaust.
- supplied with a check-valved 6mm hosetail barb fitted.
- 3/8BSPT Male and female thread.
- Male thread on the suction side.
Available on backorder
- 3/8BSPT thread
- 12mm OD hose
Available on backorder
- 3/8BSPT thread
- 12mm OD hose
- 90deg elbow
In stock (can be backordered)
- 3/8 BSPT Thread
- 8mm OD hose
In stock (can be backordered)
Available on backorder
Description
Our Vacuum station Kit is not only perfect for reducing excess wear on your vacuum pump by only using it when its needed, but is also adjustable for times when you don’t need a full vacuum.
- Adjustable cut in pressure from 0 to -14.7 PSI.
- Change color display shows red while the vacuum pump outlet is operating, turns green when desired vacuum is reached.
- Durable powder-coated steel construction.
- Fused 8A 240vac output, controlled via the vacuum switch.
- Vibration dampening rubber feet.
- Suits both of our Large/small pumps.
- Can suit both our new 750ml/3.5L/15L resin traps
- Digital gauge can be set in MPa, kPa, kgf/cm2, bar, psi, InHg or mmHg (set to psi)
- Australian made.
If you already have your own vacuum pump chances are it can simply plug in but may not fit the mounting holes that we have for our stocked pumps.
Additional information
| Weight | 25 kg |
|---|---|
| Dimensions | 40 × 35 × 10 cm |
| Vacuum station options | Vacuum Station, Large pump and 3.5L resin trap |
