1. Cut from real carbon fiber plate 2mm thick, Can be collapsed flat. Great for gifts.

 

Australian made!

 

High quality Australian made vacuum catch pot.

Includes:

  • Clear 12mm thick, acrylic lid, so you can see inside while in use. (Handy when being used for degassing)
  • High quality, stainless steel, 60mm oil filled vacuum gauge.
  • Suitable to bolt onto our Vacuum station.
  • Durable powder coat finished steel pot.
  • Resin intake tube positioned central in the lid to line up with a cup placed inside.
  • Vacuum manifold block placed on the side of the pot giving 3x 3/8 BSPT ports, to give more area to view through the lid, and for easier lid removal.
  • Replaceable silicon seal
  • ALL CATCHPOTS GIVEN A 24 HOUR VACUUM TEST!! GUARANTEED TO HOLD FULL VACUUM FOR 24 HOURS!!

Use a vacuum catch pot in between your job and the vacuum pump to prevent any resin entering the pump.

Can also be used as a ‘degassing chamber’ meaning you can extract air bubbles out of your mixed epoxy or rtv silicon by blocking the resin ports, placing the cup inside and turning on your vacuum pump. (plugs supplied).

All our resin traps are proudly manufactured locally here in Lismore NSW and fully assembled in house. They can be used as a stand alone unit or adapted onto our vacuum station base giving further advantages.

25mm wide carbon fiber tape 50m long.

It is woven using 3k carbon for warp and a very light 75 tex fiberglass as weft for the binder and has a locked fringe.

Its approximate weight is 200gsm

Even though this product is called a ‘tape’ this is a dry fabric, you will need to combine it with a resin.

  • High Quality SMC 8mm onetouch fitting.
  • Suits our 8mm/5mm vacuum line here
  • Thread suits our manifold blocks and vacuum pumps.
  • 3/8″ BSPT thread.

Many other options are available please contact us if you have any questions

 

 

50mm wide carbon fiber tape 50m long.

It is woven using 3k carbon for warp and a very light 75 tex fiberglass as weft for the binder and has a locked fringe.

Its approximate weight is 200gsm

Even though this product is called a ‘tape’ this is a dry fabric, you will need to combine it with a resin.

75mm wide carbon fiber tape 50m long.

It is woven using 3k carbon for warp and a very light 75 tex fiberglass as weft for the binder and has a locked fringe.

Its approximate weight is 200gsm

Even though this product is called a ‘tape’ this is a dry fabric, you will need to combine it with a resin.

For anybody cutting a lot of fabrics, these will be life changing!

  • 200mAh Li-ion and 3.7 V battery powered shears,
  • Includes 2 sets easily replaceable Carbide blades.
  • Easily cuts all fabrics, even Kevlar with no weave distortion.

Additional replacement blades can be found here

 

Easily replace blunt blades on your battery powered shears.

This item is a replacement blade only, purchase the electric shears here

Brass hosetail barbs

They have a thread size and a hose size.

Thread size: The thread size needs to match what you want to screw the barb into.

Hose size: The hose size needs to match the size hose you are using.

Choose the correct barb using the options dropdown menu.

Note: 1/4 hose size fits both the standard vacuum tube and the SMC vacuum line. (SMC line is smaller and harder to push on, usually use SMC line with one touch fittings found here)

A disposable type brush for applying resin to the fabric in a wet lay style layup, they have an acetone resistant wooden handle if you do want to try and save them.

25mm wide.

A disposable type brush for applying resin to the fabric in a wet lay style layup, they have an acetone resistant wooden handle if you do want to try and save them.

50mm wide.

Highly non-stick tape perfect for masking holes in molds, temporary barriers or for an instant temporary release surface on any material.

 

  • Short term temperature resistance 220 Deg C
  • Long term temperature resistance 180 Deg C
  • Silicone adhesive
  • 33m long
  • 25mm wide

 

Suitable with Epoxy, Polyester and vinyl ester

Highly non-stick tape perfect for masking holes in molds, temporary barriers or for an instant temporary release surface on any material.

 

  • High temp PET tape
  • Silicone adhesive
  • 33m long
  • 50mm wide

 

Suitable with Epoxy, Polyester and vinyl ester

Gram scales for accurately mixing epoxy resins.

3000g x 0.1g increments

Accuracy 0.1g

Takes 2x AAA batteries (not included)

8″ Ambidextrous shears with a 2.5″ cut,

Blades made of high carbon stainless steel alloy with added molybdenum and vanadium and thoroughly hardened to Rockwell 60HRC.

Correctly adjusted to cut multiple plies of Kevlar, composites, carbon, glass and similar tough materials from pivot to tip.

Large, durable ergonomic cushion grip handles for control and comfort.

Ambidextrous! Use with either right or left hand.

Tension adjusting pivot screw.

Double serrated (serrations on both blades)

We love these shears!!

Kinetix H103 1kg Hardener.

Used with Kinetix R118 Infusion Resin.

HARDENER ONLY

0